RX8010SJ (Low Current Consumption I2C-Bus Interface Real Time Clock Module)

RX-8564LCRX8010SJ

Complies with EU RoHS directive.
  • Built in frequency adjusted 32.768kHz crystal unit.
  • Interface Type
    I2C-Bus Interface (400kHz)
  • Operating voltage range
    1.6V to 5.5V
  • Wide voltage for time keeping
    1.1V to 5.5V
  • Low backup current
    160nA / 3V(Typ.)
  • Frequency output function
    C-MOS output or Open-Drain output
  • Built-in user RAM
    128 bit (8 bit x 16, SRAM)
  • The various functions include full calendar, alarm, timer, etc.
  • This product is conform to industrial standard SOP8 package, and it can be mounted to the common land pattern.
  • Epson prepared Linux driver for development
  • http://www5.epsondevice.com/en/information/support/linux_rtc/
  • The registered trademark Linux® is used pursuant to a sublicense from LMI(Linux Mark Institute)
  • The I2C-Bus is a trademark of NXP Semiconductors

Block diagram

 

Block diagram

Overview

  • Interface Type
    • I2C-Bus Interface.(Hi-speed bus specifications 400kHz)
  • Frequency output function
    • It may select a CMOS or open drain output
    • Output frequency can be selected as 32.768kHz, 1024Hz, 1Hz.
  • Timer function
    • Timer function can be set up between 1/4096 second and 65535 hours.
    • Timing period are 1hour, 1min, 64Hz, 4096Hz.
    • It is recorded automatic to TF-bit at the time of event occurrence,and possible to output with /IRQ1 or /IRQ2 pin.
  • Alarm function
    • Alarm function can be set to day of week,day, hour, and minute.
    • It is recorded automatic to AF-bit at the time of event occurrence,and possible to output with /IRQ1 pin.
  • Built-in RAM
    • 128 bit (8 bit x 16 word)

Pin function

Signal Name Input/
Output
Function
SCL Input This is a shift clock input pin for serial data transmission.
SDA Bi-directional This is the data input/output pin for serial data transfer.
IRQ1 Output This pin outputs interrupt signals ("L" level) for alarm, timer, time update,
and 32.768kHz. This is an N-ch open-drain output.
/IRQ2 Output This pin outputs interrupt signals ("L" level) for timer and FOUT.
This is a C-MOS output.
VDD Supply This is a power-supply pin.
GND Supply This pin is connected to a ground.

Terminal connection / External dimensions

Terminal connection External dimensions(Unit: mm)


The metal case inside of the molding compound may be exposed on the top or bottom of this product. This purely cosmetic and does not have any effect on quality, reliability or electrical specs.


Specifications *Refer to application manual for details.

Recommend Operating Conditions

Item Symbol Condition Min. Typ. Max. Unit
Power voltage VDD - 1.6 3.0 5.5 V
Clock voltage VCLK - VLOW 3.0 5.5 V
Operating temperature TOPR - -40 +25 +85 °C

Frequency characteristics

Item Symbol Condition Rating Unit
Frequency
tolerance
Δ f/f Ta=+25°C
VDD=3.0V
5±23 *
×10-6
Oscillation
Start-up time
tSTA Ta=+25°C
VDD=1.6V~5.5V
1Max s
Ta=-40°C~+85°C
VDD=1.6V~5.5V
3Max s

*Equivalent to 1 minute of monthly deviation

Current consumption characteristics

Ta=-40°C to +85°C

Item Symbol Conditions Min. Typ. Max. Unit
Current Consumption lBK Input pins are"L"
fCLK=0Hz
/IRQ1.2=OFF,
TSEL2="1"
VDD=5V - - 350 nA
VDD=3V - 160 320
l32k fCLK=0Hz
/IRQ1:32.768kHzON,
TSEL2="1"
VDD=5V - 5.5 7.0 µA
VDD=3V - 3.0 4.0
Page Top