RX-4581NB (Built-in SRAM Serial-Interface Real Time Clock Module)

RX-4581NBRX-4581NB

Complies with EU RoHS directive.
  • Built in frequency adjusted 32.768 kHz crystal unit.
  • Interface Type
    4-wire serial interface
  • Operating voltage range
    1.6V to 5.5V
  • Wide Timekeeper voltage range
    1.6V to 5.5V
  • Low backup current
    0.4µA / 3V(Typ.)
  • Built-in SRAM
    Built-in 128bit(8bit×16)RAM.
  • 32.768kHz frequency output function
    C-MOS output With Control Pin
  • The various functions include full calendar, alarm, timer.

Block diagram

Block diagram


Overview

  • Built-in SRAM
    • Include 128bit(8bit × 16)RAM.
  • Interface Type
    • Serial interface in 4lines form.
    • * It is possible to make it to 3lines by wired-OR connecting DI and DO pins.
  • 32.768kHz frequency output function
    • FOUT pin output (C-MOS output), CL=30pF
    • FOE pin enables output on/off control.
  • Timer function
    • Timer function can be set up between 1/4096 second and 4095minutes.
    • It is recorded automatic to TF-bit at the time of event
      occurrence,and possible to output with /TIRQ pin output
      (open-drain output).
  • Interrupt function
    • Alarm interrupt function , and timer interrupt function.

Pin function

Signal Name Input/Output Function
CE0 Input The chip enabled input pin 0. (It has a built -in pull-down resistance)
CE1 Input The chip enabled input pin 1. (It does not have a built -in pull-down resistance)
CLK Input The shift clock input pin for serial data transfer.
Dl Input The data input pin for serial data transfer.
DO Output The data output pin for serial data transfer.
FOUT Output This pin outputs the reference clock signal at 32.768 kHz (CMOS output).
High impedance at the time of output off.
FOE Input The input pin for the FOUT output control.
/ AIRQ Output The open drain output pin for alarm and time update interrupts.
/ TIRQ Output The open drain output pin for timer interrupt.
VDD - Connected to a positive power supply.
GND - Connected to a ground.

Terminal connection / External dimensions

Terminal connection External dimensions(Unit: mm)

Metal may be exposed on the top or bottom of this product. This will not affect any quality, reliability or electrical spec.


Specifications *Refer to application manual for details.

Recommend Operating Conditions

Item Symbol Condition Min. Typ. Max. Unit
Power voltage VDD - 1.6 3.0 5.5 V
Clock voltage VCLK - 1.6 3.0 5.5 V
Operating temperature TOPR - -40 +25 +85 °C

Frequency characteristics

Item Symbol Condition Rating Unit
Frequency tolerance Δ f/f Ta=+25°C VDD=3.0V 5±23 * ×10-6
Oscillation start-up time tSTA Ta=+25°C VDD=3.0V 3Max. s

* Please ask for tighter tolerance. (Equivalent to 1minute of monthly deviation)

Current consumption characteristics

*Ta=-40°C to +85°C

Item Symbol Condition Min. Typ. Max. Unit
Current
Consumption
lBK CE0,CE1=GND
FOE=GND

FOUT ;output OFF(Hi-z)
VDD=5V 0.6 1.2 µA
VDD=3V 0.4 0.8
l32k CE0,CE1=GND
FOE=VDD

FOUT;
32.768kHz output ON
CL=30pF
VDD=5V 8.0 20.0 µA
VDD=3V 5.0 12.0
Page Top