MG7050HAN SAW-Based Differential Multi Output SAW OSCILLATOR (HCSL)

MG7050HANMG7050HAN

RoHS Compliantpb free New
  • Ultra Low jitter
    0.3ps Max.
    2 or 4 outputs and it is able to reduce fan-out buffers
  • Frequency range
    100 MHz ~ 200 MHz
  • Supply voltage
    2.5 V / 3.3 V
  • External dimensions
    7.0 × 5.0 × 1.6 mm
  • Output
    HCSL (2 or 4 outputs)
  • Application
    GbE, Fiber Channel, SAS, PCI express

Specifications (characteristics)

Item Symbol Specifications Conditions / Remarks
Output frequency range f0 100 MHz ~ 200 MHz Please contact us about available frequencies.
100MHz,125MHz,156.25MHz,200MHz Standard frequency
Supply voltage VCC D:2.5V ±0.125V C:3.3V ±0.33V VCC1 and VCC2 need same voltage
Storage temperature T_stg -55°C to +125°C Store as bare product after packing
Operating temperature T_use A:0°C to +70°C,
B:-20°C to +70°C,
D:-5°C to +85°C
Frequency tolerance *1 f_tol J: ± 50 × 10-6 ,L: ±100 × 10-6
Current consumption ICC 55 mA Typ., 84 mA Max. 60 mA Typ., 90 mA Max. 2-outputs OE=VCC,
with L_HCSL
95 mA Typ., 128 mA Max. 100 mA Typ., 136 mA Max. 4-outputs
Disable current I_dis 11 mA Typ., 23 mA Max. 12 mA Typ., 25 mA Max. 2-outputs OE=GND
15 mA Typ., 28 mA Max. 16 mA Typ., 30 mA Max. 4-outputs
Symmetry SYM 45%to 55% At outputs crossing point
Output voltage VOH 0.66 V ~ 0.85 mV DC characteristics
VOL -0.15 V to 0.15 V
Output load condition
L_HCSL 50 Ω or 42.2 Ω, with CL=2pF,
Rs=33 Ω or 27 Ω
 
Input voltage VIH 70% VCC Min. OE and ZSEL terminals
VIL 30% VCC Max.
Rise time / Fall time Rr / Rf 1 V/ns to 4 V/ns Between -0.15 V and 0.15 V of differential output.
Start-up time t_str 5 ms Typ., 10 ms Max. Time at minimum supply voltage to be 0 s
Phase Jitter tPJ 0.19 ps Typ. 0.16 ps Typ. fo=100 MHz Offset frequency
12kHz to 20MHz
0.18 ps Typ. 0.15 ps Typ. fo=125 MHz
0.16 ps Typ. 0.13 ps Typ. fo=156.25 MHz
0.14 ps Typ. 0.12 ps Typ. fo=200 MHz
0.3 ps Max.  
Skew t_skew 20ps Typ., 50ps Max. FSEL=H
Aging f_aging N:± 10 × 10-6 / year Max. First year +25°C,
VCC=2.5V,3.3V
A: Included in Frequency tolerance *2 10 years

*1 Frequency tolerance includes initial frequency tolerance, temperature variation, supply voltage change and reflow drift.
*2 "A" is not acceptable when Frequency tolerance is "J" and Operating temperature is "B" or "D".

Block diagram

blockdiagram

Product name (Standard form) /Product Number

Product name (Standard form)

Product name (Standard form)

ZSEL function

  Output line Differential
Zo
HCSL load
L_HCSL
Shunt resistor
Rs
ZSEL H 100 Ω 50 Ω 33 Ω
L 85 Ω 42.2 Ω 27 Ω

External dimensions

dimention

(Unit :mm)



Footprint (Recommended)

footprint

(Unit :mm)

To maintain stable operation, provide a 0.01 µF to 0.1 µF by-pass capacitor at a location as near as possible to the power source terminal of the crystal product (between Vcc, Vcc1, Vcc2 - GND).

Page Top