MG7050VAN SAW-Based Differential Multi Output OSCILLATOR(LVDS)


RoHS Compliantpb free New
  • Ultra Low jitter
    0.3ps Max.
    2 or 4 outputs and it is able to reduce fan-out buffers
  • Frequency range
    100 MHz ~ 700 MHz
  • Supply voltage
    2.5 V / 3.3 V
  • External dimensions
    7.0 × 5.0 × 1.6 mm
  • Output
    LVDS (2 or 4 outputs)
  • Application
    Server, Storage, Network Instrument.

Specifications (characteristics)

Item Symbol Specifications Conditions / Remarks
Output frequency range f0 100 MHz ~ 700 MHz Please contact us about available frequencies.
Standard frequency
Supply voltage VCC D:2.5V ±0.125V C:3.3V ±0.33V VCC1 and VCC2 need same voltage
Storage temperature T_stg -55°C to +125°C Store as bare product after packing
Operating temperature T_use A:0°C to +70°C,
B:-20°C to +70°C,
D:-5°C to +85°C
Frequency tolerance *1 f_tol J: ± 50 × 10-6 ,L: ±100 × 10-6
Current consumption ICC 35mA Typ,
50mA Max.
45mA Typ.,
56mA Max.
2-outputs OE=VCC,
L_LVDS=100 Ω
40mA Typ.,
66 mA Max.
50mA Typ.,
72 mA Max.
Disable current I_dis 7mA Typ., 18mA Max. 8mA Typ., 20mA Max. OE=GND
Symmetry SYM 45% to 55% At outputs crossing point
Output voltage VOH 247 mV ~ 454 mV DC characteristics
VOL 1.125 V ~ 1.375 V
Output load condition
L_LVDS 100 Ω Connected between OUTnP and OUTnN
Input voltage VIH 70% VCC Min. OE and FSEL terminals
VIL 30% VCC Max.
Rise time / Fall time tr / tf 200 ps Typ., 400 ps Max. Between 20% and 80% of differential output peak to peak voltage
Start-up time t_str 5 ms Typ., 10 ms Max. Time at minimum supply voltage to be 0 s
Phase Jitter tPJ 0.19 ps Typ. 0.16 ps Typ. fo=100 MHz Offset frequency
12kHz to 20MHz
0.18 ps Typ. 0.15 ps Typ. fo=125 MHz
0.17 ps Typ. 0.14 ps Typ. fo=156.25 MHz
0.15 ps Typ. 0.13 ps Typ. fo=212.5 MHz
0.12 ps Typ. 0.11 ps Typ. fo=312.5 MHz
0.06 ps Typ. 0.05 ps Typ. fo=700 MHz
0.3 ps Max.  
Skew t_skew 20ps Typ., 50ps Max. FSEL=H
Aging f_aging N:± 10 × 10-6 / year Max. First year +25°C,
A: Included in Frequency tolerance *2 10 years

*1 Frequency tolerance includes initial frequency tolerance, temperature variation, supply voltage change and reflow drift.
*2 "A" is not acceptable when Frequency tolerance is "J" and Operating temperature is "B" or "D".

Product name (Standard form) /Product Number

Product name (Standard form)

Product name (Standard form)

Block diagram

blockdiagram 2output4output

FSEL function

2-outputs OUT OUT2
4-outputs OUT1/OUT2 OUT3/OUT4
FSEL H fo fo
L fo fo/2

External dimensions


(Unit :mm)

Footprint (Recommended)


(Unit :mm)

To maintain stable operation, provide a 0.01 µF to 0.1 µF by-pass capacitor at a location as near as possible to the power source terminal of the crystal product (between Vcc, Vcc1, Vcc2 - GND).

Page Top