XG5032HAN (Crystal Oscillator Low-Jitter SAW Oscillator)


RoHS Compliantpb free
  • Frequency range
    100MHz to 200MHz
  • Supply voltage
    2.5V ,3.3V
  • Output
  • Function
    Output enable (OE)
  • External dimensions
    5.0 × 3.2 × 1.4mm
  • Low jitter and low phase noise by SAW unit.


Item Symbol Specifications Conditions/Remarks
Output frequency range f0 100MHz to 200MHz Please contact us for inquiries regarding available frequencies.
Supply voltage VCC C:3.3V±0.33V
D:2.5V ±0.125V
Storage temperature T_stg -55°C to +125°C Store as bare product.
Operating temperature *1 T_use A:0°C to +70°C ,
B:-20°C to +70°C ,
D:-5°C to +85°C
Frequency tolerance *1 f_tol J: ± 50 × 10-6 ,L: ±100 × 10-6
Current consumption ICC 35mA Max. OE=VCC,
with output load
Disable current I_dis 15mA Max. OE=GND
Symmetry SYM 45% to 55% at outputs crossing point
Output voltage VOH 0.75 V Typ., 0.66V to 0.85V DC characteristics,Single output
VOL 0 V Typ., -0.15V to 0.15V
Crossing Voltage
Vcr 0.25V to 0.55V  
Input voltage VIH 70% VCC Min. OE terminal
VIL 30% VCC Max.
differential output
rise slew rate/
fall slew rate
Rr / Rf 1V/n to 4V/ns Between -0.15% and 0.15 defferential output
Start-up time t_str 10ms Max. Time at minimum supply voltage to be 0s
Phase Jitter tPJ 0.3ps Max. fo ≤ 160 MHz Offset frequency: 12kHz to 20MHz
0.4ps Max. 160 MHz < fo ≤ 175 MHz
0.2ps Max. fo > 175 MHz
Frequency aging f_aging ± 10 × 10-6 / year Max. First year +25°C,
First year, VCC=2.5V,3.3V
A: Included in Frequency tolerance 10years

Product name (Standard form)

Product name (Standard form) /Product Number

Measurement circuit

  • By-pass capacitor 1 (approx. 0.01µF to 0.1 µF) places closely between Vcc and GND.
  • By-pass capacitor 2 (approx. 10 µF) places closely between power supply terminals on the board.
  • Output line length L is estimated as follows

External dimensions

(Unit: mm)

  • OE pin = HIGH : Specified frequency output.
  • OE pin = LOW : Output is high impedance #2 and #3 are connected to the cover.

Footprint (Recommended)

(Unit: mm)

To maintain stable operation, provide a 0.01uF to 0.1uF by-pass capacitor at a location as near as possible to the power source terminal of the crystal product (between Vcc - GND).

Page Top