SG-8002LB (Crystal Oscillator Programmable)

SG-8002LBSG-8002LB

RoHS Compliant pb free
  • Frequency range
    1MHz to 125MHz
  • Supply voltage
    3.0V / 3.3V / 5.0V
  • Function
    Output enable(OE) or Standby(ST)
  • Short mass production lead time by PLL technology.
  • SG-Writer available to purchase,
    please contact SEIKO EPSON or local sales representative.

Specifications

Item Symbol Specifications *2 Condition/Remarks
PT / ST PH / SH PC / SC
Output frequency range f0 1MHz to 125MHz - VCC =4.5V to 5.5V
- - 1MHz to 125MHz VCC =3.0V to 3.6V
- - 1MHz to 66.7MHz VCC =2.7V to 3.6V
Supply voltage VCC 4.5V to 5.5V 2.7V to 3.6V
Storage
temperature
T_stg -55°C to +125°C Store as bare product.
Operating
temperature
T_use -20°C to +70°C / -40°C to +85°C *1
Frequency tolerance f_tol B: ±50 × 10-6, C: ±100 × 10-6 -20°C to+70°C
M: ±100 × 10-6 -40°C to+85°C *3
Current
consumption
ICC 45mA Max. 28mA Max. No load condition,
Max. frequency
Output disable
current
I_dis 30mA Max. 16mA Max. OE=GND
(PT,PH,PC)
Stand-by current I_std 50μA Max. ST
(ST,SH,SC)
Symmetry *1 SYM 40% to 60% - TTL load:1.4V,
Max. load condition
- 40% to 60% CMOS load:
50% VCC level,
Max. load condition
45% to 55% *1
High output voltage VOH VCC -0.4V Min. IOH=-16mA(PT,ST,PH,SH ),
-8mA(PC,SC)
Low output voltage VOL 0.4V Max. IOL=16mA
(PT,ST,PH,SH),
8mA(PC,SC)
Output load condition
(TTL) *1
L_TTL 5TTL Max. - f0 ≤ 90MHzand Max.
Supply voltage
Output load
condition(CMOS) *1
L_CMOS 15pF Max. Max. frequency
and Max. Supply voltage
Output enable /
disable input voltage
VIH 2.0V Min. 70% VCC Min. OE terminal or ST
VIL 0.8V Max. 20% VCC Max.
Rise / Fall time *1 tr / tf 4ns Max. - TTL load:
0.4V to 2.4V level
- 3ns Max. CMOS load:
20% VCC to 80% VCC level
Start-up time t_str 10ms Max. Time at minimum supply voltage to be 0s
Frequency aging f_aging ±5 × 10-6 / year Max. +25°C,
VCC=5.0V/3.3V(PC,SC)
First year

*1 Operating temperature, the available frequency, symmetry, output load conditions and rise/fall time, please refer to "Outline specifications" page.
*2 PLL-PLL connection & Jitter specification, please refer to "Jitter specifications and characteristics chart" page.
*3 Refer to "Outline specifications" (Frequency range) for "M" and "L" tolerance availability. Checking possible by the Frequency checking program.

Product name (Standard form)

External dimensions

dimension
note
(Unit: mm)

Metal may be exposed on the top or bottom of this product. This will not affect any quality, reliability or electrical spec. Note.
OE Pin (PT, PH, PC)
OE Pin = "H" or "open": Specified frequency output.
OE Pin = "L": Output is high impedance.

ST Pin (ST, SH, SC)
ST Pin = "H" or "open": Specified frequency output.
ST Pin = "L": Output is low level (weak pull - down), oscillation stops.


Footprint (Recommended)

footprint
(Unit: mm)


To maintain stable operation, provide a 0.01uF to 0.1uF by-pass capacitor at a location as near as possible to the power source terminal of the crystal product (between Vcc - GND).

Page Top