SG7050CAN (CRYSTAL OSCILLATOR SPXO)
- Frequency range
1MHz ~ 75MHz (Fundamental mode) - Supply voltage
1.8V to 3.3V Typ. - Function
Standby(ST) - Output
CMOS - Operating temperature
-40 °C to +105 °C
Specifications (characteristics)
| Item | Symbol | SG7050CAN | Conditions / Remarks | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Output frequency range | f0 | 1MHz to 75MHz | Please contact us about available frequencies. | ||||||
| Supply voltage | VCC | T: 1.60V to 3.63V | 1MHz < f0 ≦ 60MHz | See of figure ※1 |
|||||
| T: 1.71V ~ 3.63V | 60MHz ≦ f0 ≦ 75MHz, +85°C Max. | ||||||||
| K: 2.25V to 3.63V | 60MHz ≦ f0 ≦ 75MHz, +105°C Max | ||||||||
| Storage temperature | T_stg | -40°C to +125°C | Storage as single product | ||||||
| Operating temperature | T_use | B: -20 °C to +70 °C | See of figure※1 | ||||||
| B: -20 °C to +70 °C | |||||||||
| H: -40 °C to +105 °C | |||||||||
| Frequency tolerance | f_tol | D: ±25 × 10-6 | Only -20 °C ~ +70 °C | ||||||
| J: ±50 × 10-6 | |||||||||
| L:±100 × 10-6 | |||||||||
| Current consumption | ICC | 3.0mA Max. | No load condition Maximum frequency. | ||||||
| Stand-by current | I_std | 2.7 µA Max. | ST=GND | ||||||
| Symmetry | SYM | 45 % to 55 % | 50% VCClevel, L_CMOS ≦ 15 pF | ||||||
| Output voltage | VOH | 90% VCC Min. |
1.8 V ± 10 % | 2.5 V ± 10 % | 3.3 V ± 10 % | ||||
| VOL | 10% VCC Max. | IOH | -1.5 mA | -3 mA | -4 mA | ||||
| IOL | 1.5 mA | 3 mA | 4 mA | ||||||
| VOH-2 | VCC-0.4 V Min. |
1.8 V ± 10 % | 2.5 V ± 10 % | 3.3 V ± 10 % | |||||
VOL-2
|
0.4 V Max. | IOH | -3 mA | -4 mA | -6 mA | ||||
| IOL | 3 mA | 4 mA | 6 mA | ||||||
| Output load condition(CMOS) | L_CMOS | 15 pF Max. | |||||||
| Input voltage | VIH | 80% VCC Min. | ST terminal | ||||||
| VIL | 20% VCC Min. | ||||||||
| Rise time/ Fall time |
tr / tf | 3 ns Max. 3.5 ns Max. ( @1.8V ± 10 % ) |
20 % VCC ~ 80 % VCC level, L_CMOS ≦15 pF |
||||||
| Start-up time | t_str | 3ms Max. | t=0 at 90 % VCC +85°C,(+105°C) | ||||||
| Frequency aging | f_aging | ±3 × 10-6 / year Max.. | +25°C, First year. | ||||||
External dimensions
(Unit: mm)
Note.
ST pin = "H" or "open" : Specified frequency output.
ST pin = "L" : Output is high impedance, oscillation stops.
Footprint (Recommended)
(Unit: mm)
To maintain stable operation, provide a 0.01uF to 0.1uF by-pass capacitor at a location as near as possible to the power source terminal of the crystal product (between Vcc - GND).
