SG7050VEN (Crystal Oscillator SPXO) OUTPUT : LVDS LOW PHASE JITTER

SG7050VENSG7050VEN

RoHS Compliant

pb free

  • Frequency range
    :25 MHz to 200 MHz
  • Supply voltage
    :2.5 V Typ. / 3.3 V Typ.
  • Function
    :Output Enable (OE)
  • External dimensions
    :7.0 ×5.0 × 1.5mm
  • Output
    :LVDS
  • Low phase jitter
    :60 fs typ. (f0 = 156.25MHz)
  • Operating temperature
    :- 40 °C to + 85 °C
    :- 40 °C to + 105 °C

Specifications

Item Symbol Specifications Condition/Remarks
Output frequency range f0 25 MHz to 200 MHz Please contact us for inquiries regarding available frequencies.
Supply voltage VCC D: 2.5 V ± 0.125 V
C: 3.3 V ± 0.165 V
Storage temperature T_stg - 55 °C to + 125 °C Store as bare product.
Operating temperature T_use G: - 40 °C to + 85 °C
H: - 40 °C to +105 °C
Frequency tolerance f_tol D: ± 25 × 10-6 Max.
(Not available H: - 40 °C to + 105 °C)
Includes initial tolerance, temperature change, Vcc change and 5 years aging(+25 °C)
J: ± 50 × 10-6 Max. Includes initial tolerance, temperature change, Vcc change and 10 years aging(+25 °C)
L : ± 100 × 10-6 Max. Includes initial tolerance, temperature change, Vcc change and 10 years aging(+25 °C)
Current consumption ICC 25 mA Max. OE = VCC, with output load
Disable current I_dis 15 mA Max. OE = GND
Output load condition L_LVDS 100 Ω Connected between OUT1 to OUT2
Output voltage VOD 250 mV to 450 mV VOD1 , VOD2
dVOD 50 mV Max. dVOD = | VOD1 - VOD2
VOS 1.15 V to 1.35 V VOS1 , VOS2
dVOS 50 mV Max. dVOS = | VOS1 - VOS2 |
Symmetry SYM 45 % to 55 % at outputs crossing point
Rise time / Fall time tr / tf 300 ps Max.(VCC = 3.3 V)
350 ps Max.(VCC = 2.5 V)
at 20 % to 80 % of Differential Output peek to peek voltage
High input voltage VIH 70 % VCC Min. OE terminal
Low input voltage VIL 30 % VCC Max.
Oscillation
Start-up time
t_str 10 ms Max. Time at minimum supply voltage to be 0s

Phase Jitter

  100 MHz 125 MHz 156.25 MHz 200 MHz
Phase Jitter Typ. [fs]
(Offset Frequency
12 kHz ~ 20 MHz)
90 70 60 50

Product Name

External dimensions

dimension

(Unit: mm)

Note:
OE pin = "HIGH" or "Open" : Specified frequency output.
OE pin = "LOW" : Output is high impedance.

Footprint (Recommended)

footprint

(Unit: mm)

In order to achieve optimum jitter performance,
it is recommended that the capacitor (0.1 µF + 10 µF)
between Vcc and GND pin should be placed as close
to the Vcc pin as possible.

Page Top