SG-9001JC (Crystal Oscillator Spread Spectrum)
- Frequency range10MHz to 166MHz
- Supply voltage3.3V
- FunctionOutput enable(OE)
- Range of spreading percentage is selectable by program
(Center or Down spread, 6Values )
SG-9001JC
Specifications
Item | Symbol | Specifications | Remarks |
---|---|---|---|
Output frequency range | f0 | 10.000MHz to 166.000MHz | Please contact us for inquiries regarding available frequencies. |
Supply voltage | VCC | 3.3V±0.3V | |
Storage temperature | T_stg | -55°C to +100°C | Store as bare product. |
Operating temperature | T_use | -20°C to +70°C | |
Current consumption | ICC | 30mA Max. | No load condition, f0 = 166MHz |
Disable current | I_dis | 20mA Max. | OE=GND, f0 = 166MHz |
Symmetry | SYM | 45% to 55% | CMOS load: 50% VCC level, L_CMOS=15pF |
Output voltage | VOH | VCC-0.4V Min. | IOH=-8mA |
VOL | 0.4V Max. | IOL= 8mA | |
Output load condition | L_CMOS | 15pF Max. | |
Input voltage | VIH | 70% VCC Min. | OE terminal |
VIL | 30% VCC Max. | OE terminal | |
Rise time / Fall time | tr / tf | 2.7ns Max. | 20% VCC to 80% VCC level, L_CMOS=15pF. |
Start-up time | t_str | 10ms Max. | Time at minimum supply voltage to be 0s |
Frequency aging | f_aging | ±5 × 10-6 / year Max. | +25°C, First year |
Spread Spectrum Specifications
Center Spread | Code | C02P | C05P | C07P | C10P | C15P | C20P |
---|---|---|---|---|---|---|---|
Percentage | ±0.25% | ±0.5% | ±0.75% | ±1.0% | ±1.5% | ±2.0% | |
Down Spread | Code | D05P | D10P | D15P | D20P | D30P | D40P |
Percentage | -0.5% | -1.0% | -1.5% | -2.0% | -3.0% | -4.0% |
Product name (Standard form) /Product Number
External dimensions
(Unit: mm)
Note.
OE pin
OE pin = "H" or "open" : Specified frequency output.
OE pin = "L" : Output disable output is weak pull-down.
(130kΩ Typ.)
SSON pin (SG-9001CA)
SSON pin = "H" : Spread spectrum disable.
SSON pin = "L" or "open" : Spread spectrum enable
Metal may be exposed on the top or bottom of this product. This will not affect any quality, reliability or electrical spec.
Footprint (Recommended)
(Unit: mm)
To maintain stable operation, provide a 0.01uF to 0.1uF by-pass capacitor at a location as near as possible to the power source terminal of the crystal product (between Vcc - GND).