RX-8581SA (I2C-Bus Interface Real Time Clock Module)

RX-8581SARX-8581SA

Complies with EU RoHS directive.

  • Built-in frequency adjusted 32.768kHz crystal unit.
  • Interface Type
    I2C-Bus Interface(400kHz)
  • Operating voltage range
    1.8V to 5.5V
  • Wide Timekeeper voltage range
    1.6V to 5.5V
  • Low backup current
    0.45µA / 3V(Typ.)
  • 32.768kHz frequency output function
    C-MOS output With Control Pin
  • The various functions include full calendar, alarm, timer.
    * The I2C-Bus is a trademark of NXP Semiconductors

Block diagram

Block diagram

Overview

  • Interface Type
    • I2C-Bus interface. (Hi-speed bus specifications 400kHz)
      * I2C-Bus slave address : read A3h and write A2h
  • 32.768kHz frequency output function
    • FOUT pin output (C-MOS output ), CL=30pF
    • 32.768kHz clock frequency output. (Duty 50 ±5 %)
  • Timer function
    • Timer interrupt function can be set up between 1/4096second and 4095minutes.
    • It is recorded automatic to TF-bit at the time of event
      occurrence,and possible to output with /TIRQ pin output
      (N-ch open-drain output).
  • Interrupt function
    • Alarm interrupt function, Time update interrupt function.

Specifications *Refer to application manual for details.

Recommend Operating Conditions

Item Symbol Condition Min. Typ. Max. Unit
Power voltage VDD - 1.8 3.0 5.5 V
Clock voltage VCLK - 1.6 3.0 5.5 V
Operating temperature TOPR - -40 +25 +85 °C

Frequency characteristics

Item Symbol Condition Rating Unit
Frequency tolerance Δ f/f Ta=+25°C
VDD=3.0V
5±23 * ×10-6
FOUT output Duty tw/t Ta=-40°C to +85°C
VDD=2.4V to 5.5V
50±5 %

* Please ask for tighter tolerance.( Equivalent to 1 minute of monthly deviation )

Current consumption characteristics

Item Symbol Conditions Min. Typ. Max. Unit
Current
Consumption
lBK fSCL=0Hz
FOE=GND

FOUT;output OFF(LOW)
VDD=5V - 0.65 1.2 µA
VDD=3V - 0.45 0.8
l32k fSCL=0Hz
FOE=VDD

FOUT;32.768kHz output ON
CL=30pF
VDD=5V - 8.0 20.0 µA
VDD=3V - 5.0 12.0

name

Terminal connection / External dimensions

Terminal connection External dimensions

(Unit: mm)

The metal case inside of the molding compound may be exposed on the top or bottom of this product.
This purely cosmetic and does not have any effect on quality, reliability or electrical specs.

Footprint (Recommended)

footprint

(Unit: mm)

To maintain stable operation, provide a 0.1uF by-pass capacitor
at a location as near as possible to the power source terminal of the crystal product (between Vcc - GND).

Page Top