TG5032SAN TCXO / VC-TCXO (ULTRA HIGH STABILITY 10pins terminal type)
- Frequency range
10MHz to 50MHz
- Supply voltage
3.3V Typ./5.0V Typ.
- Frequency / temperature characteristics
±0.1× 10-6 Max. *1
- Frequency aging
±0.02× 10-6 Max./24 hours *2
- External dimensions
5.0 × 3.2 × 1.45mm(10pins)
- Applications
FemtoCell, Small Cells
- Features
Ultra high stability
TG5032SAN
(1.5MB)Specifications (characteristics)
| Item | Symbol | TG5032SAN (Clipped sine wave) |
Conditions / Remarks | |
|---|---|---|---|---|
| VC-TCXO | TCXO | |||
| Output frequency range | f0 | 10 MHz to 50 MHz | ||
| 19.2 , 26 , 30.72 , 40 MHz | Standard frequency | |||
| Supply voltage | VCC | C : 3.3 V ±5 % , H : 5.0 V ±5 % (Supply voltage range : 2.7 V to 5.5 V) | ||
| Storage temperature | T_stg | -40 °C to +90 °C | Storage as single product | |
| Operating temperature | T_use | A : 0 °C to +70 °C | Standard temp. range | |
| Frequency tolerance | f_tol | ±2.0 × 10-6 Max. | After reflow , +25 °C | |
| Frequency / temperature characteristics *1 |
fo-TC | A : ±0.1 × 10-6 Max. | A : 0 to +70 °C (standard spec.) | |
| H : ±0.25 × 10-6 Max. | G : -40 to +85 °C (Option spec.) | |||
| Frequency / load coefficient |
fo-Load | ±0.1 × 10-6 Max. ( 10 MHz ≦ f0 ≦ 40 MHz ) | Load ±10 % | |
| ±0.2 × 10-6 Max. ( 40 MHz < f0 ≦ 50 MHz ) | ||||
| Frequency / voltage coefficient |
fo-VCC | ±0.1 × 10-6 Max. ( 10 MHz ≦ f0 ≦ 40 MHz ) | VCC = 3.3 V ± 0.165 V | |
| ±0.2 × 10-6 Max. ( 40 MHz < f0 ≦ 50 MHz ) | ||||
| Frequency aging *2 | f_age | ±0.02 × 10-6 Max. | +25 °C , 24h | |
| ±1.0 × 10-6 Max. | +25 °C , First Year | |||
| Current consumption | ICC | 5.0 mA Max. | ||
| Input resistance | Rin | 100 kΩ Min. | - | VC - GND (DC) |
| Frequency control range | f_cont | ±5 × 10-6 to ±10 ×10-6 | - | J , D : VC = 1.5 V ± 1.0 V at VCC = 3.3 V K , E : VC =1.65 V ± 1.0 V at VCC = 3.3 V L , H : VC = 2.5 V ± 1.0 V at VCC = 5.0 V |
| Frequency change polarity | - | Positive polarity | - | |
| Output level |
VPP | 0.8V Min. | Peak to peak. | |
| Start-up time | t_str | 2.0 sec. Max.(Filter: Standard) / 5.0 ms Max.(Non-Filter: Option) | T = 0 at 90 % VCC | |
| Output load condition | Load | 10 kΩ / 10 pF | ||
Note : Please contact us for requirements not listed in this specification.
*1 Based on frequency at (fmax+fmin)/2.
*2 After 48 hours operating
External dimensions
(Unit: mm)
Footprint (Recommended)
(Unit: mm)
To maintain stable operation, provide a 0.1 µF by-pass capacitor at a location as near as possible to the power source terminal of the crystal product (between VCC - GND).
