VG5032VFN VOLTAGE -CONTROLLED CRYSTAL OSCILLATOR(VCXO)

MG7050VANVG5032VFN

Complies with EU RoHS directive.

Pb free.

NEW

  • Frequency range
    :100 MHz to 250 MHz
  • Supply voltage
    :3.3 V Typ.
  • Absolute Pull Range
    :± 50 × 10-6 Min / 100 MHz ~ 170 MHz
  • :± 20 × 10-6 Min / 100 MHz ~ 250 MHz
  • Operation temperature
    :-40 °C to +85 °C
  • :-40 °C to +105 °C
  • External dimensions
    :5.0 × 3.2 × 1.3 mm
  • Output
    :LVDS
  • Function
    :Output Enable(OE)

Specifications (characteristics)

Item Symbol Specifications Conditions / Remarks
Output frequency range f0 100 MHz to 250 MHz Please contact us about available frequencies.
Supply voltage VCC 3.3 V ± 0.165 V
 
Control voltage VC 1.65 V ± 1.65 V
 
Storage temperature range T_stg -55 °C to +125 °C Storage as single product.
Operating temperature range T_use G: -40 °C to +85 °C
H: -40 °C to +105 °C
Current consumption ICC 25 mA Max.
OE = VCC, with output load
Frequency tolerance f_tol ± 50 × 10-6 Max. Includes initial tolerance, temperature change,
VCC change and 10years aging at +25 °C
At VC = 1.65 V, reference to f0
Absolute pull range*1 APR B: ± 50 × 10-6 Min. 100 MHz ~ 170 MHz
M: ± 20 × 10-6 Min. 100 MHz ~ 250 MHz
Input resistance Rin 10 MΩ Min. DC level
Frequency change polarity
- Positive slope VC = 0 to 3.3 V
Symmetry SYM 45 % to 55 % At outputs crossing point
Output voltage VOD 250 mV to 450 mV VOD1 , VOD2 DC characteristics
VOS 1.15 V to 1.35 V VOS1 , VOS2
Output load condition L_LVDS 100 Ω Connected between OUT to OUT
High input voltage VIH 70 % VCC Min.  VIH or Open : Enable
Low input voltage VIL 30 % VCC Max. VIL or GND : Disable
Rise/Fall times Tr / Tf 0.3 ns Max. at 20 % and 80 % of Differential Output peek to peek voltage
Oscillation start up time T_str 10 ms Max. Time at minimum supply voltage to be 0 s
Phase Jitter tPJ 160 fs Max. ( 122.88 MHz)
80 fs Max. ( 245.76 MHz)
Offset Frequency 12kHz to 20MHz

*1 Absolute pull range = Frequency control range - Frequency tolerance.
* Please keep VC pin open or ground while powering up VCC.

Product name (Standard form)

Product name

External dimensions

(Unit: mm)

Note.
OE Pin
OE pin = "H" or "Open" : Specified frequency output.
OE pin = "L" : Output is high impedance.

Footprint (Recommended)

footprint

(Unit: mm)

In order to achieve optimum jitter performance, it is recommended that the capacitor (0.1 µF + 10 µF)
between VCC and GND pin should be placed as close to the VCC pin as possible.

Page Top